| Technote PR 17 | April 1986 |
It is not a bug, and it is not malicious programming. It is simply that users are told in the manual to load pin-feed paper with the top edge at the pinch-rollers, making it easy to rip off the printed page(s) without wrecking the paper that is still in the printer or having to roll the paper up and down manually. At the end of every job, the software makes sure that the paper is left in this position, leaving the print-head roughly an inch from the edge. If something is to be printed higher than that, the paper has to be rolled backwards.
As you are probably aware, the "printable rectangle" (rPage) reported to the application by the print code begins 1/2 inch from the top edge, not one inch. The reason for that is that we want a document to print exactly the same way whether you are printing on the ImageWriter I or II. On the ImageWriter I, the paper starts with the print-head 1/2 inch from the top edge, so the top of rPage is at that position for both printers.
There is no way to eliminate the reverse-feed action, because the user would have to load the paper a different way AND the software would have to know that this was done.
Incidentally, in addition to the paper motion described above, there is also
the "burp." This is a 1/8-inch motion back and forth to take up the slop in the
printer's gear-train. It is needed on the old-model printer, and there is
debate about whether or not it's needed on ALL ImageWriter IIs, or only some,
or none. The burp has been in and out of the ImageWriter II code in various
releases; right now it's in.